Product ID:XERGON 1000HPM 1/8 CODE 0034000M
MSDS Date:11/11/1987
FSC:3439
NIIN:01-228-0115
MSDS Number: BGQYG

X-ERGON,A PARTSMASTER CO,DIV OF NCH

1400 E NORTHGATE DR
IRVING, TX 75015-2102

Emergency Phone: 214-438-1381

Info Phone: 214-438-1381

Preparer: J. MICHAEL COLE

Cage: EO081

X-ERGON,A PARTSMASTER CO.,DIV OF NCH

152170 IRVING, TX 75015 US

Telephone: 972-438-1381

Cage: EO081

CALCIUM FLUORIDE

CAS: 7789-75-5

RTECS: EW1760000

OSHA PEL 2.5 MG/M3 (F)

ACGIH TLV: 2.5 MG/M3 (F); 8990

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 10MG/M3

ACGIH TLV: 5MG/M3

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

SODIUM SILICATE

CAS: 6834-92-0

RTECS: VV9275000

OSHA PEL 20MG/M3(AMORPHS SI)

ACGIH TLV: 10MG/M3(AMORPHS SI)

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE:FUMES & GASES CAN BE DANGEROUS
TO YOUR HEALTH. SHORT TERM OVEREXPOSURE TO WELDING FUMES MAY RESULT
IN DISCOMFORT SUCH AS DIZZINESS,NAUSEA OR DRYNESS OR IRRITATION OF
EYES,NOSE & THROAT. CHRONIC: SIDEROSIS(IRON IN LUNGS),MAY AFFECT
PULMONARY FUNCTION. ARC RAYS CAN INJURE EYES & BURN SKIN. ELECTRICK
SHOCK CAN KILL.
Explanation of Carcinogenicity:CHROMIUM VI IS A HUMAN CARCINOGEN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:AGGRAVATION OF EXISTING RESPIRATORY
OR ALLERGIC CONDITIONS. HIGHER LEVEL OF LUNG RELATED PROBLEMS AMONG
SMOKERS.

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES;SKIN:REMOVE
CONTAMINATED CLOTHING.WASH WITH SOAP & WATER;INHALATION:REMOVE FROM
EXPOSURE & OBTAIN PROMPT MEDICAL ATTENTION.IF NOT BREATHING GIVE
CPR.IF UN CONSCIOUS,GIVE OXYGEN.EMPLOY FIRST AID TECHNIQUES
RECOMMENDED BY AMERICAN RED CROSS;INGESTION:DO NOT INDUCE VOMIT.SEE
DOCTOR.

Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE.(DO NOT
USE WTR TO EXTING MOLTEN METAL.USE WTR TO KEEP METAL COOL IN FIRE)
Fire Fighting Procedures:SEE AMERICAN NATIONAL STD Z49.1,SAFETY IN
WELDING & CUTTING,PUBLISHED BY THE AMERICAN WELDING SOCIETY & OSHA
PUBLICATION 2206 (29CFR192.1910)
Unusual Fire/Explosion Hazard:WELDING ARKS & SPARKS CAN IGNITE
COMBUSTIBLE PRODUCTS.

Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUE &
PLACE IN APPROPRIATE DISPOSAL CONTAINER.

Other Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
MONITOR AIR TO ENSURE ACCEPTABLE EXPOSURES. AVOID ELECTRICAL SHOCK
BY MAINTAINING DRY WORK AREA.

Respiratory Protection:FUME RESPIRATOR OR AIR SUPPIED RESPIRATOR IN
CONFINED SPACES OR WHERE VENTILATION DOES NOT KEEP EXPOSURES BELOW
TLV.
Ventilation:LOCAL EXHAUST
Protective Gloves:WELDER GLOVES
Eye Protection:HELMET OR FACE SHIELD WITH FILTER LENS.
Other Protective Equipment:WELDER'S PROTECTIVE CLOTHING
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING.REMOVE &
LAUNDER CONTAMINATED CLOTHING.
Supplemental Safety and Health
THE FUME LIMIT FOR CR VI (0.05MG/M3 WILL BE REACHED BEFORE THE GENERAL
LIMIT OF 5MG/M3 FOR FUMES IS REACHED.MONITOR FUMES FOR CR VI LEVEL.

HCC:N1
Appearance and Odor:WELDING ROD. 1/8 INCH DIAMETER BY 14 INCHES LONG.

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES OF METALS & METAL
OXIDES,CO,CO*2,NITROGEN OXIDES,OZONE,FLUORIDES.

Waste Disposal Methods:DISPOSE OF FUMES,FLUX OR WELD GRINDING RESIDUE
FROM THE WORK AREA OR FROM FILTERS IAW ALL APPLICABLE FEDERAL,STATE
& LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.